Icon 19-21 FORD RANGER 0-3.5 STAGE 6 SUSPENSION SYSTEM W TUBULAR UCA AL KNUCKLE K93206TA

ICON Vehicle Dynamics 2019-2021 Ford Ranger suspension systems are designed to dramatically increase the on and off-road ride quality. ICON engineers primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. With wheel travel and ride quality in mind, ICON engineers researched each component of the new Ranger platforms suspension and addressed any areas where performance could be extracted. The Stage 6 (Tubular) system includes vehicle-specific tuned, extended travel 2.5 Series coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle feel through the range of travel. These coilovers are also height adjustable from 0-3.5 allowing the use of larger, more aggressive wheel and tire combinations. The included ICON tubular upper control arm kit is designed to improve the overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the ICON Delta Joint allows for full bump and extended droop travel of the front suspension while eliminating bind. ICON 2.0 Aluminum Series remote reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear while the included foam bump stop kit increases rear end compliance. To improve the front-to-rear balance and increase the compliance of the truck, the rear spring rate of the Multi Rate Leaf Packs has been lowered compared to stock. The Multi Rate Leaf Pack was designed with an additional leaf that can be exchanged or added to the pack yielding additional spring rate that will handle more outfitted vehicles. The ICON 2019-2021 Ford Ranger Stage 6 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
This system features tubular steel upper control arms with ICONs patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Height-adjustable coilovers provide a range of 0-3.5 of front lift height
Fits 2WD & 4WD applications
Increased lift height allows for fitment of larger and more aggressive tires
35% increase in front wheel travel over stock
ICON shocks feature vehicle specific tune for superior performance and ride quality
Corrosion resistant anodized shock body with remote reservoir and 5/8 shaft (2.0 Aluminum Series shocks)
Corrosion resistant CAD plated shock body with 7/8 shaft (2.5 Series coilovers)
FK Rod End bearings provide extended longevity and minimal deflection
Shocks are fully rebuildable and revalvable
ICON upper control arms allow for additional wheel travel (when paired with extended travel coilovers) while improving suspension geometry for predictable handling
Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
Delta Joint ball joints carry ICONs exclusive 5 year limited warranty
3 user-adjustable rear spring rates for unique vehicle configurations
Significantly lighter rear spring rate (up to 35%) allows for smooth motion throughout the entire range of travel
Direct bolt-in design makes for a simple and straightforward installation
Lifetime guarantee against ICON fabricated component and coil spring breakage or manufacturer defect
Kit Components
91255 QTY:1 19-23 RANGER EXT TRAVEL 2.5 VS IR COILOVER KIT
98510DJ QTY:1 19-21 RANGER TUBULAR UCA DJ KIT (AL KNUCKLE ONLY)
96519R QTY:2 19-23 RANGER 0-1.5 REAR 2.0 VS RR
191205 QTY:1 UNIVERSAL FOAM BUMP STOP KIT
198520A QTY:2 19-23 RANGER MULTI RATE LEAF PACK W/ ADD IN LEAF
91200H QTY:1 19-23 RANGER MULTI RATE LEAF SPRING HARDWARE KIT
Additional fitment info from vendor. (Please verify and see fitment disclaimer below)
2021 Ford Ranger Lariat
2021 Ford Ranger XL
2021 Ford Ranger XLT
2021 Ford Ranger XLT Plus
2020 Ford Ranger Lariat
2020 Ford Ranger XL
2020 Ford Ranger XLT
2019 Ford Ranger Lariat
2019 Ford Ranger XL
2019 Ford Ranger XLT